Superplant - HPS/MH Hybrid bulb 600W - 2500°K - E40

A high pressure sodium (HPS) mixed with a metal halide (MH) to give the best absorption by plants.

This bulb will give you the best vegetative and floral quality on the market.

Features:

• Power: 600W
• Temperature: 2500°K
• PPF: 653.1 μmol/s
• Service life: 10,000 hours
• Base: E40
• Do not use with magnetic ballast with 600W HPS/MH fuse
• Always use these bulbs at their rated wattage, do not "dim"!

Tip:

Use with a suitable power supply and fixture. Before replacing the old bulb, switch off the mains supply and allow it to cool. Used bulbs must be disposed of in accordance with current regulations. When fitting the bulb, check that the contact with the two poles of the socket is correct.

For safety reasons, replace the bulb immediately if the glass is scratched or cracked. The bulb must be placed in a closed fixture (even during testing) to limit the consequences of breakage. It must be protected from any contact during operation. To avoid ballast degradation, end-of-life bulbs must be replaced as soon as possible.

In fact, a reduction in flux occurs, resulting in a loss of around 20 to 25% of your harvest. Mains voltage should not vary by more than 3%. For continuous operation, the lamp must be switched off for at least 15 minutes at least once a week. The manufacturer declines all responsibility for debates resulting from incorrect use of the lamp or with unsuitable equipment.

Use gloves when replacing the lamp.

For horticultural lighting only. Not suitable for household room lighting.