We use cookies to enhance your experience, analyze site traffic, and personalize content. You can accept all cookies or customize your preferences.
Calitek offers a revolutionary and innovative horticultural lighting system: the Pro CMH 315W.
The ballast and reflector are combined in a single module for optimum material quality and ease of installation.
Supplied without lamp
| -20% | €103 |
| -15% | €109.44 |
| -10% | €115.88 |
| -7.5% | €119.09 |
| -5% | €122.31 |
Calitek offers a revolutionary and innovative horticultural lighting system!
The ballast and reflector are combined in a single module for optimum material quality and unparalleled ease of installation.
This electronic ballast is designed with an internal microprocessor in the soft start lamp and intelligently detects the lamp voltage, current to extend its working hours. The dimmable functions can save energy on both input and output sides. Staggered ignition to be more efficient to avoid inrush current. Perfect self-protection mechanism to extend its life.
This design can run a lamp at rated power and is composed of a four phase controller to set the ballast output to 190W, 245W, 315W or Super Par, which will increase the brightness by 15%. Be sure to run your lamp continuously at 100% for 10 minutes before switching to other settings. Switching settings quickly can damage the lamp.
During operation, internal heat will dissipate through the housing. When the case temperature reaches 85°C, the ballast will gradually reduce the power to 80%; When the case temperature reaches 90°C, the ballast will stop operating until it cools down to 70°C, then return to full power state.
This revolutionary feature, unique to our products, makes the CALITEK digital ballast the safest and most reliable ballast when used in automated multi-lamp applications. When multiple units are connected to the same mains circuit, our integrated ignition control software will fully balance the electrical draw by igniting one lamp at a time to avoid electrical surges and spikes that can overload the mains circuit and trip circuit breaker systems. For added efficiency, this feature is activated in conjunction with our "Soft Start Technology".
Soft Start Technology extends lamp life by stopping the current flow to the lamp and preventing lamp overload. When the ballast starts from cold, there will be a 3 second delay before ignition.
After ignition, there will be a series of random delays of 0-2 seconds before full brightness is reached after approximately 3-5 minutes. SoftStart technology is also activated when you increase and decrease the power to the lamp using the 'Smart-Step' function.
The CALITEK digital ballast is suitable for use with all good quality CMH lamps. For a guaranteed perfect combination and the best results, we recommend the CALITEK horticultural lamps: CMH 315W at 3200°K or CMH 315W at 4200°K.
The CALITEK housing design acts as a superior heat sink making the ballast extremely cool in operation without the need for internal fans.
The CALITEK digital ballast utilizes a sophisticated circuit control system not seen in other manufacturers' ballasts. The system protects against a range of faults including: open circuit protection, short circuit protection, over voltage protection, under voltage protection and over temperature protection. Upon ignition, the ballast performs a 3-second circuit test and, in the event of a fault, the ballast will enter a protection mode to prevent damage to the ballast and lamp.
CALITEK digital ballast is up to 30% more efficient than standard magnetic ballast producing more lumens of light per watt of energy consumed. Efficiency does not decrease and is maintained for the life of the unit.
The CALITEK digital ballast has no noisy internal fans and is completely silent in operation.
Low frequency square wave electronic ballast, for better performance of your grow lamp. The square wave technology, chosen by Calitek to power its CMH315W bulbs, is more expensive to manufacture than sine wave technology but provides the most stable power supply for the lamp, which increases lamp performance.
The square wave design provides a constant maximum voltage to the lamp over a long period of time, which produces more photons of light for your plants. The sine wave design, on the other hand, provides maximum voltage to the lamp for a shorter period of time.
The low frequency avoids problems related to RF interference and acoustic resonance (premature lamp failure).
Model: CK-315
Lamp to be used: CMH 315W
Input voltage: 240V, 50/60Hz
Input current: 1.5A / 240V
Maximum output power: 360W
Leakage current: 0.5mA max at 240Vac
THD: < 10%
Power factor: >0.99 (>0.99 max, >0.95)
Input voltage range: 208-240V
Operating frequency: 110±10Hz
Storage temperature: -45°C to 80°C
Case temperature rise: 35°C (95°F)
Required IP environment: IP20
Unit weight: 5.8Kg
Unit size: 58.1 x 37.3 x 10.5 cm
Bulb failure detection: YES
Turn-on time: 3-10 seconds
Input frequency: 47 / 63 Hz
Universal input voltage: 280-240V
Inrush current: 60A at 220Vac
Total harmonic distortion: < 10% (THD)
Input current protection: INTERNAL FUSE
Dimmer: 190/245/315/SUPER BY
Open circuit voltage: < 300V
Turn-on voltage: < 4KV
Insulation resistance: Input/Gnd 50MΩ - 500Vdc 1 Min
Lamp power: CONSTANT
Storage humidity: 10 to 95% RH
Lamp flicker / Acoustic resonance: NO
RF interference: NO
Operating temperature: 0°C to 35°C
Insulation voltage: Input/Gnd 1600Vac - 5mA 1min
Operating humidity: 20 to 95%
Attention : This system is supplied without lamp.
Calitek proposes you its two CMH 315W bulbs in the insert just on the right.
Ballast guaranteed for 2 years
