We use cookies to enhance your experience, analyze site traffic, and personalize content. You can accept all cookies or customize your preferences.
discover the new TT silent M UN R1 ultra-quiet air extractors Flow rate: 230 m3/h or 340 m3/h. 2 speeds, switchable on connection The UN option enables external temperature sensing, with a 4 m long temperature probe attached to the extractor, as well as a speed variator for perfect climate control of the space.
| -20% | €199.20 |
| -15% | €211.65 |
| -10% | €224.10 |
| -7.5% | €230.33 |
| -5% | €236.55 |
This TT SILENT-M 125mm extractor from Winflex allows you to renew the air in your grow room.
The extractor renews CO² and ejects depleted air from the grow room while regulating T°.
The extractor's advantage is that the fan is housed in a sound-insulated casing. This extractor is therefore designed to be silent.
Nevertheless, the air is powerful and high-pressure.
Features TT SILENT-M Ø 125mm UN R1 extractor with IEC :
The ideal solution for ventilation of premises with high requirements for permanent temperature control, e.g. greenhouses. The fan with the electronic temperature and speed control module enables automatic control (air quality) of motor speed according to air temperature in the air duct or chamber.
Design:
The outer casing is made of polymer-coated steel. The housing is internally soundproofed with 50 mm of mineral wool. The casing is specially perforated for soundproofing.
The fan housing is fitted with an airtight terminal box for connection to the electrical network.
Motor:
The motor is equipped with thermal switches to prevent overheating and protect the motor.
Service life up to 40,000 hours in non-stop operation.
Mounting:
The fan can be mounted anywhere and at any angle in the duct system. Several fans can be
installed in parallel to achieve maximum airflow.
The fan housing is fitted with hooks for floor, wall or ceiling mounting.
Please note: Cables and mains plug available as optional extras
To further optimize the sound performance of your installation, consider 125mm sound-absorbing wadding.
The technical parameters on the ERP energy label and the declaration of performance (DoP) are listed for fan operation at an external pressure of 100 Pa in accordance with EN13141-7:2010.
