Can filters - Filtre à charbon 38 special 150 - Flange 250

The 38-Special range of high-performance charcoal filters in galvanized steel, developed by the Dutch brand Can Filter, is renowned throughout Europe!

High-capacity and efficient, Can Filter charcoal filters are designed for large growing areas and will delight any indoor horticulturist wishing to completely annihilate all noxious odors.

Here's how to use your Can Filter 38 Special 150 flange 250 mm charcoal filter for two consecutive years:

1. Install the Can Filter 38 Special 150 flange 250 mm charcoal filter in the center and height of the growing area, and connect it to the inlet of an air extractor with a maximum flow rate of 2100 m3 per hour.
2. Make sure that it remains fully effective only during the flowering or fruiting phase, so as not to be exposed to excessive humidity ( below 70% ), which would permanently impair its performance.
3. Keep the pre-filter of the Can Filter 38 Special 150 flange 250 mm (a wadding around the charcoal filter) clean and in place when in use, to prevent clogging caused by environmental pollution and plant pollen.
4. Clean the pre-filter of the Can Filter 38 Special 150 flange 250 mm, as soon as it appears tarnished, by simply removing it and placing it in the washing machine at 30°C (maximum) to finish by air-drying only.

Specifications:

• Dimensions: 380x15000mm
• Flange: 250mm.
• Diameter: 40mm
• Flow rate: Between 2100 and 2400m³/h.
• Max. temperature: 80°C.
• Max. humidity: 70%.
• Coal bed: 6.5cm
• Type of coal: Pellets
• Total weight : 75Kg
• Coal weight: 50Kg
• Material: Steel