GSE Fan Controller min-max HYSTERESIS for 1 air extractor (10A max)

THE GSE FAN CONTROLLER minimum-maximum with Hysteris for one extractor.

Climate controller for an extractor:

• Temperature control, minimum-maximum ,
• Speed controller with hysteresis adjustment,
• Temperature variation of the speed controller.

The regulator maintains a constant temperature and prevents from running in vertu the controller maintains a constant temperature and prevents the execution of the set minimum speed, thus allowing the set maximum speed to run. The hysteresis defines the temperature range and provides the necessary vacuum to any properly configured growth chamber. It can be easily controlled, setting the required minimum temperature, maximum speed and hysteresis on four buttons. The controller comes as a finished piece and is ready to use. Like the entire range GSErange, this climate controller is reliable and self-contained. Sold complete with a waterproof cover, plugs with cover flaps and a low voltage sensor making it perfectly suited for wet rooms. The sensor comes with a 4 meter long cable and can be extended up to 50 meters.

Warranty: 1 year.

Dimensions and technical specifications :

• Housing: WxHxD = 130 x 80 x 70mm
• Controller: WxHxD = 160 x 100 x 90mm
• Designed for: 10A 200W / TRIAC 1 x 16A
• Designed for: 10A 2300W / TRIAC 1 x 45A
• Volts: 230V / 50HZ
• 5V digital sensor Measures temperatures from -55 ° C to + 125 ° C (-67 ° F to +257 ° F)
• Accuracy of 0.5 ° C from -10 ° C to + 85 ° C
• Protection class: IP54

Setting range:

• Temperature: 20 ° C to 30 ° C
• Minimum speed: off, 20% to -100%
• Maximum speed: 100% to -50
• Negative pressure: 100% to -50