Winflex - NK150 Electric duct heater with thermostat - 1.2-1Un

Duct heater with thermostat Winflex

More than just a heater, the round heater Winflex can be used alone or in connection with a duct and an extractor.

It allows a heat diffusion in a horticultural environment.

In association with a controller, it will allow you to precisely adjust the room temperature.

The use in ventilation or air conditioning duct with an electric heater will make the diffusion powerful and constant Winflex will make the diffusion powerful and constant.

The air heater Winflex is equipped with 2 thermostats to protect against unexpected overheating.
Basic protection with automatic restart at +50°C.
After cooling down, the thermostat automatically closes the heating control circuit Winflex. An emergency protection system is provided with manual restart.

Equipped with rubber gaskets, for an ideal connection to the ducts.

Materials: Galvanized steel casing and box - Stainless steel heating elements.
Dimensions: Ø 149 - H 255mm - L 306mm - L1 226mm - W 120mm
Space between housing and duct outlet: 40cm

• A good installation must allow a uniform distribution of the air in the whole cross section.
• The air filter protects the heating elements against pollutants and ensures a good operation. It should be placed at the inlet of the heater.
• For use in a large cultivation area, the connection of several heaters in series is possible.
• The three-phase heaters have a star connection.
• Integrated temperature controller.
  
  

Information - Electric heater Winflex for round air ducts NK150 1.2:

• If you use the speed control option, the airflow through the heater must be at a minimum.
• If the fan is not operating, the power supply to the heater will be interrupted Winflex must be deactivated.