We use cookies to enhance your experience, analyze site traffic, and personalize content. You can accept all cookies or customize your preferences.
The best of CMH technology for a more efficient bulb.
| -20% | €55.92 |
| -15% | €59.42 |
| -10% | €62.91 |
| -7.5% | €64.66 |
| -5% | €66.41 |
Coated ceramic metal halide lamps designed to replace and surpass quartz metal halide lamps.
The excellent color rendering of this lamp in combination with high luminous efficacy allows for very good light quality with reduced operating costs. The very good luminous efficacy of the Master Color CDM-T lamps allows a high level of illumination to be achieved and at the same time limits thermal development. All models are treated with a UV block to reduce the risk of fading.
| Energy consumption kWh / 1000 h | 397 kWh |
D (max) 47 mm - L 11.9 mm 161 mm - C (max) 257 mm
| Bulb temperature (max) | 600 ° C |
| Cap base temperature (max) | 250 ° C |
Specifications
| Cap-Base | E40 [E40] |
| Operating position | UNIVERSAL [All or Universal (U) |
| System description | Universal |
| Luminous flux (nominal) (Name) | 35270 lm |
| Color Designation | Brilliant White (CW) |
| Chromaticity coordinate X (Name) | 376 |
| Chromaticity coordinate Y (Name) | 374 |
| Correlated Color Temperature (Name) | 4200 K |
| Luminous Efficiency (Nominal) | 98 lm / W |
| Color Rendering Index (Nom) | 92 |
| Scotopic / photopic lumen ratio | 1,74 |
| Power | 361,0 W |
| Lamp current acceleration (max) | 3.6 A |
| Lamp current (EM) (Nom) | 3.42 A |
| Ignition supply voltage (max) | 198 V |
| Peak ignition voltage (max) | 5000 V |
| Peak ignition voltage (min) | 750 V |
| Reignition time (min) (max) | 900 s |
| Ignition time (Max) | 30 s |
| Voltage (max) | 133 V |
| Voltage (min) | 115 V |
| Voltage (Nom) | 124 V |
| Dimmable | No |
| Starting time 90% (max) | 3 min |
| Energy efficiency label (EEL) | A + |
| Mercury (Hg) content (Name) | 51.0 mg |
Warnings and Safety
- Use only in a fully enclosed luminaire, even during testing (IEC61167, IEC 62035, IEC60598)
- Luminaire must be able to contain hot lamp parts in case of breakage
- Control gear must include end-of-life protection (IEC61167, IEC 62035)
- Lamps can use electronic or electromagnetic control gear, except for 35
W/942 and 20 W lamps, which must use electronic control gear.
- A broken lamp is very unlikely to affect your health. If a lamp breaks, ventilate the room for 30 minutes and
remove the pieces, preferably with gloves. Place them in a sealed plastic bag and take it to your local
waste management site for recycling. Avoid using a vacuum cleaner
