Discover the new ATS Pro 200 and 300W luminaires from Lumatek. The new benchmark in the horticultural lighting industry, thanks to their performance and aesthetic, practical design.
Discover the new ATS Pro 200 and 300W luminaires from Lumatek. The new benchmark in the horticultural lighting industry for their performance, aesthetic design and practicality. TheATS 300W Pro is a lightweight luminaire capable of producing very high light levels. With a PPF of 816 µmol/s and an output of 2.7 µmol/J, it's ideal for 100x100cm coverage.
Lumatek takes advantage of the latest advances LED for a beautiful, reliable luminaire that can cover the entire light spectrum, offering you a unique solution for your plants, from propagation and growth to flowering.
ATS Pro becomes the ideal range for all indoor cultivation, creating a uniform diffusion of light even over short distances, allowing good canopy penetration without hot spots or excessive heat.
ATS Pro is 100% silent, with no need for a fan thanks to the innovative heat sink and the use of passive natural convection, resulting in a considerable increase in luminaire life.
- The new ATS Pro range benefits from the latest generation of controllable drivers, ensuring superior efficiency of LED.
- The result of extensive R&D, the diodes are better distributed, improving light diffusion and footprint.
- New IP65 rating thanks to Clear Glue protective cover technology, light transmission is 99% higher
- Extended diode life and improved corrosion resistance.
Model |
ATS PRO 300W |
|
Input voltage : |
200 -240V 50/60Hz |
Input power : |
310W |
|
PPF : |
816 μmol/s |
| Footprint: | Up to 100x100cm |
Protection |
IP65 |
Efficiency : |
2.7 μmol/J |
Dimensions |
559.5x559.5x71.6mm |
Light source |
High-quality white, red and far-red diodes |
Weight |
5.2kg |
|
Operating temperature : |
-20° to + 40°C |
Accepted humidity : |
20% to 90% non-condensing |
Water/dust resistance |
IP65 |
Beam angle |
120° |
| Spectrum | Full Spectrum + |
Full Spectrum
The ATS Pro range can be controlled with the digital lighting controller Lumatek ( Digital Panel Plus 2.0 ) with lighting synchronization, automated dimming (1% increments), secure temperature control, sunrise/sunset mode and up to 100 devices per controller.
You can also use a universal control system with a 0-10V output signal, if required using an RJ signal converter to a 0-10V control adapter.
