The Zeus 465W Pro 2.9 lamp from Lumatek consists of several bars LED for a high-performance horticultural lighting system.
The new 2.9 range from Lumatek The new Zeus range is produced using high-quality drivers and LED latest-generation high-efficiency drivers from Lumileds and Osramgenerating a full-spectrum light source ideal for vegetation and flowering cycles. These new LED Top Bin will ensure a full, balanced spectrum, perfect for 1.2 × 1.2 m coverage.
Another new feature in the 2021 range is Clear Glue protection technology on the bars LED allowing 99% higher light transmission without light loss, extended diode life, additional corrosion resistance and high IP65 tightness.
The Zeus 465W Pro 2.9 lamp can be used throughout the entire cultivation cycle of your plants, from growth to flowering! Recommended for use in controlled growing boxes or greenhouses. It can also be used in humid environments. The ideal temperature for optimum operation of this lighting system is between 20°C and 30°C.
For basic maintenance, simply clean the bars with damp absorbent cotton.
Dimensions: 998x900x51.9mm
Composition:
Advantages:
Model |
Zeus 465W Pro 2.9 |
Input voltage : |
200 -240V 50/60Hz |
Input power : |
475W |
Footprint |
1.2x1.2m |
Power factor : |
>0.95 |
PPF : |
1353 μmol/s |
Efficiency : |
2.9 μmol/J |
Spectrum : |
Full spectrum F |
Light source : |
High spec LUMILEDS (W) & Osram (R) LED |
Operating temperature : |
-20° to + 40°C |
Accepted humidity : |
20% to 90% non-condensing |
Water/dust resistance : |
IP65 |
Beam angle : |
120° |
Manual dimming / external lamp controller : |
0-10V analog protocol |
For advice on the best luminaire in terms of footprint, wattage and usable efficiency, depending on the size of your growing area: click here.
Luminaires with LED Lumatek can be fully controlled with the Digital Panel Lumatek Plus