The HeaterMax Compact 20 heat pump fromUbbink heat pump will allow you to enjoy your pool longer because of its air recovery system that will heat the water of your pool. The heating effect will be even more effective with the use of a bubble cover.
How it works :
The energy contained in the air is captured by the heat pump, multiplied by the thermodynamic principle and transferred to the pool water.
This is the most economical way, after the use of solar energy! In the heat pump, the energy is taken from the air, only the compressor consumes energy.
The coefficient of performance (COP) is 3.5. This means that for every 1 kW of electricity paid, the pump produces 3.5 kW of heating.
Technical characteristics of the HeaterMax Compact 10 heat pump Ubbink
- Power supply: 220-240 VAC / 1 Phase / 50 Hz
- Rated current: 24.4 A
- Recommended fuse . 10 A
- Power supply cable : 2,5m / with Residual Differential Device (RDD),
- Protection class : I
- Type of protection : IP X4
- Heating performance conditions 1: Air 27℃ / Water 27℃ / Humidity 80%
- Heating power: 4.20 kW
- Power consumption: 0.91 kW
- Coeff. of performance (COP): 4.2
- Heating performance conditions 2: Air 15℃ / Water 26℃ / Humidity 70%
- Heating power: 3.20 kW
- Power consumption: 0.91 kW
- Coeff. of performance (COP): 3.5
- Maximum pool volume: 10 m³
- Minimum recommended water flow : 2 m³/h
- Maximum water pressure : 15 kPa 15 kPa
- Temperature range: 15°C - 35°C
- Operating range: 12°C - 42°C
- Inlet / outlet: 38-32 mm
- Compressor (type/brand) : Hitachi
- Fan direction : horizontal
- Noise level (at 1 meter) : 55 dB(A)
- Noise level (at 10 meters) : 46 dB(A)
- Housing : Galvanized steel, rustproof
- Water heat exchanger : Titanium tube (in a PVC tank)
- Refrigerant - R32 gas: 280 g
- GWP value : 675
- CO2 equivalent : 0,10 t
- Length : 434 mm
- Width : 432.5 mm
- Height : 460 mm
- Net weight : 26 kg
- Safety mark : CE (LVD/EMC)
Warranty : 2 years
Universal connectors 38/32 mm : 2
Download the manual
Download the technical sheet