Ubbink - HeaterMax Inverter 40 heat pump

Enjoy your pool all year round with Heatermax inverter heat pumps

The inverter heat pumps of Ubbink inverter heat pumps use the heat contained in the outside air to resistitute it in the pool water.
A cooling gas (R32) circulates in a closed and hermetic circuit.
The control unit of the heat pump continuously adjusts the speed of the compressor and the blower to the required heat demand.

The Heatermax converter 40 heat pump from ubblink has 3 modes:

Silent mode

• Low speed of the compressor and blower
• Ideal for maintaining water temperature
• Very low power consumption and noise emission
• Automatic switch to Smart mode when the difference between the theoretical and actual water temperature is greater than 2°C
  

Smart mode

• Average speed of the compressor and blower
• Ideal for regular use of the pool during the swimming season
• Very low power consumption and noise emission
• Automatic adaptation of the compressor and blower speed to the water temperature
  

Power mode

• High compressor and blower speed
• Ideal for heating up the water very quickly at the beginning of the swimming season
• Maximum heating power

What are the advantages of the heatermax inverter 40 heat pump?

• Titanium heat exchanger (for chlorinated and salt water) - corrosion-free
• Environmentally friendly (approx. 80% of the energy required to heat the water comes from the air)
• R32 refrigerant
• Can be operated without bypass
• Fully automatic flow control
• Very quiet operation due to high-quality compressor and quiet fan
• Anti-vibration rubber pads
• Protective cover included

Technical data :

• Voltage / Frequency / Phase: 220-240V ~ 50Hz / 1 phase
• Rated current: 7.4 A
• Recommended fuse: 11 A
• Power supply cable: H07RN-F 3x2.5mm²
• Protection class: I
• Protection type: IP X4

Heating performance condition 1: Air 28°C / Water 28°C / Humidity 80

• Heating power : 9,5 - 3,2 kW
• Electricity consumption : 1,06 - 0,43 kW
• Coefficient of performance (COP) : 7,5 - 5,2

Heating performance condition 2: Air 15°C / Water 26°C / Humidity 70

• Heating capacity : 3.9 - 3.6 kW
• Electricity consumption : 1.67 - 0.42 kW
• Coefficient of performance (COP) : 8.6 - 5.7

Maximum pool volume: 0-20 m3

• Minimum water flow : 2.9 m³/h
• Maximum water pressure: 12 kPa
• Water temperature (operating range): 15°C - 35°C
• Air temperature (operating range): 7°C - 43°C
• Inlet / outlet: 50 mm
• Compressor (type / brand): GREE LAMDA Inverter compressor
• Fan direction: horizontal
• Noise level at 1 m distance: 39-42 dB(A)
• Noise level at 10 m distance: 44-51 dB(A)
• Casing: galvanized stainless steel
• Heat exchanger: rotating titanium tube (in PVC housing)
• Refrigerant R32: 760 g
• GWP index: 675
• CO2 equivalent: 0.51 t
• Dimensions: 969 x 360 x 551 mm
• Net weight : 49 kg

Supplied accessories

• Winter cover: 1
• Skids (anti-vibration) : 4
• 10m extension cable for LCD screen connection: 1
• 50 mm water supply connection kit: 2
• Condensation water hose: 2
• Hose holder : 2
  

Download the manual